Step-by-step guide
10–15 minutesReconnect Hiconics Wi-Fi
Reconnect the Hiconics logger through SOLARMAN Smart.
Your official monitoring app
Download the right app for Hiconics
Use the app named in your Esena handover. These buttons open verified Apple App Store or Google Play listings.
Choose carefully: Hiconics customers use SOLARMAN Smart. SOLARMAN Business is for installers and distributors.
Before you start
Turn off mobile data, enable phone Wi-Fi and Bluetooth, stand near the logger and have the 2.4 GHz home Wi-Fi password ready.
- 01Open SOLARMAN Smart and log in. Go to Devices and select your Data Logger or Inverter.
- 02Tap the three dots (…) in the top-right corner and select Device Networking or WiFi Configuration.
- 03Confirm that your home Wi-Fi network name appears. Carefully enter your home Wi-Fi password and tap Start.
- 04When prompted, tap Go to Connect. Your phone’s normal Wi-Fi settings will open.
- 05Find the logger network named AP_XXXXXX. The numbers match the serial number printed on the physical logger stick. Connect to it.
- 06If the logger asks for a password, use the PIN or password printed on the side of the logger. Depending on the logger, this may be 12345678 or admin.
- 07Return to SOLARMAN Smart. The app will send the home Wi-Fi settings to the inverter. Wait until the progress bar reaches 100% and shows Configuration Successful.
- 08Allow up to 10 minutes for the dashboard to change from Offline to Online. If it remains offline, photograph the logger label and create a support ticket.
ImportantUse the password printed on the logger where available; do not assume every logger uses the same password. Do not use SOLARMAN Business or change inverter parameters.
Official app screens
Match what you see before you tap
SOLARMAN Smart screens
These screens show the customer SOLARMAN Smart network setup.
Official Hiconics resources